Laser Machines

Fusion Edge Laser Series

Laser engraving, cutting, and marking solutions for your business.
Epilog Fusion Edge laser engraving machines

FUSION EDGE LASER MACHINES

Business Series - 12, 24, & 36

Featuring up to 120 IPS (3.05 m/s) engraving speeds, 5g acceleration, and a variety of wattage configurations, the Fusion Edge Laser Series from Epilog can help you boost your productivity and expand your product offerings.

Comprised of the Fusion Edge 12, 24, and 36, all the machines in the Edge Series feature Epilog’s revolutionary IRIS™ Camera System that gives laser operators a real-time image of the engraving table so they can quickly and accurately position their artwork on even the most uniquely shaped items.

Systems in the Fusion Edge Series can engrave and cut a variety of materials including wood, acrylic, fabric, cork, rubber, slate, glass, and so much more. Additionally, these easy-to-use laser machines include a 7-inch LED-lit touch display, trace capabilities at the laser, as well as SAFEGUARD™ features that keep the mechanics of your laser cleaner than ever.

Get Brochure and Samples

Receive brochures and samples, and get more info from us or your local distributor.

Laser Machine: Fusion Edge 12 Fusion Edge 24 Fusion Edge 36
Work Area: 24″ x 12″ x 7″
(610 x 305 x 178 mm)
24″ x 24″ x 10″
(610 x 610 x 254 mm)
36″ x 24″ x 10″
(914 x 610 x 254 mm)
Laser Options: CO2 or Fiber CO2 CO2
CO2: 30, 40, 50, or 60 watts 40, 50, or 60 watts 50 or 60 watts
Fiber: 30 watts n/a n/a
IRIS™ Cameras: 1 overhead 2 overhead 2 overhead
More Tech Specs

Closer Look:

Take an in-depth look at the feature-packed Fusion Edge laser machines.

Technical Specifications: Fusion Edge 12, 24, and 36 Laser Machines


  Laser Machine:

FUSION EDGE 12

Business Series
Fusion Edge 12 Laser Machine

FUSION EDGE 24

Business Series
Fusion Edge 24 Laser Machine

FUSION EDGE 36

Business Series
Fusion Edge 36 Laser Machine
  Work Area:
24" x 12" (610 x 305mm) 24" x 24" (610 x 610mm) 36" x 24" (914 x 610mm)
  Material Thickness:
7" (178 mm) 10" (254 mm) 10" (254 mm)
  Laser Tube Types:
  • CO2 - air-cooled, metal/ceramic Waveguide tube, 10.6 micrometers
  • Fiber - air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1
  • CO2 - air-cooled, metal/ceramic Waveguide tube, 10.6 micrometers
  • CO2 - air-cooled, metal Waveguide tube, 10.6 micrometers
  Laser Tube Wattages:
  • CO2: 30, 40, 50, or 60 watts
  • Fiber: 30 watts
  • CO2: 40, 50, or 60 watts
  • CO2: 50 or 60 watts
  IRIS™ Camera System:
1 overhead 2 overhead 2 overhead
  Wireless Connectivity:
Included Included Included
  Included Lenses:
  • 2″ - CO2
  • 3″ - Fiber & Dual Source
  • 2″ - CO2
  • 2″ - CO2
  Optional Lenses:
1.5″ or 4″ - CO2 1.5″ or 4″ - CO2 1.5″ or 4″ - CO2
  Resolution:
Fully-flexible & user-controlled from 75 – 1200 dpi Fully-flexible & user-controlled from 75 – 1200 dpi Fully-flexible & user-controlled from 75 – 1200 dpi
  Maximum Engraving Speed (inches/meters per second):
120 IPS (3.05 m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
  Print Driver & Software:
Laser Dashboard™, Epilog Job Manager™ Laser Dashboard™, Epilog Job Manager™ Laser Dashboard™, Epilog Job Manager™
  Internal Memory:
Store multiple files up to 1 GB. Engrave any file size. Store multiple files up to 1 GB. Engrave any file size. Store multiple files up to 1 GB. Engrave any file size.
  Operating Modes:
Optimized Raster, Vector, and Combined mode. Optimized Raster, Vector, and Combined mode. Optimized Raster, Vector, and Combined mode.
  Super-Silent Cooling Fans:
Included Included Included
  Motion System:
Brushless DC Servo Motors Brushless DC Servo Motors Brushless DC Servo Motors
  X-Axis Bearings:
Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
  Belts:
Advanced B-style double-wide Kevlar precision drive belts. Advanced B-style double-wide Kevlar precision drive belts. Advanced B-style double-wide Kevlar precision drive belts.
  Job Trace:
Included Included Included
  Auto Focus:
Included Included Included
  Touch Screen:
Included Included Included
  Included Table:
Vector Cutting Table (Grid-Style) Vector Cutting Table (Grid-Style) Vector Cutting Table (Grid-Style)
  Air Assist Pump:
Optional Optional Optional
  Size (W x D x H):
39.5″ x 26.5″ x 17.9″
1003 x 673 x 455 mm
41.52″ x 32.81″ x 38.04″
1055 x 834 x 967 mm
53.52″ x 32.81″ x 38.04″
1359 x 834 x 967 mm
  Weight:
138 lbs (63 kg) 225 lbs (102 kg) 260 lbs (117 kg)
  Electrical:
110 to 240 volts, 50 or 60 Hz, single phase 110 to 240 volts, 50 or 60 Hz, single phase 110 to 240 volts, 50 or 60 Hz, single phase
  Ventilation:
350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameter
  Safeguard Features:
Included Included Included

Features: Machine Enhancements Designed to Increase Productivity

The Fusion Edge laser engraving and cutting machines from Epilog Laser combine our top-of-the-line technology and our latest features in three formats: a compact desktop machine with the Fusion Edge 12, the mid-size Fusion Edge 24, and a larger standalone system with the Fusion Edge 36 - all leveraging over three decades of laser machine design and manufacturing experience to create powerful and truly modern systems.


High speed engraving

Highest-Speed Engraving Over Largest Work Area

The Fusion Edge’s 120 IPS (3.05 m/s) engraving speed and 5G acceleration provide the fastest engraving in the industry in a compact format.

Fusion Edge IRIS Camera

IRIS™ Camera Positioning

An overhead camera system provides a real-time picture of the working area for accurate artwork placement. Drag and drop your artwork on screen for the fastest work processing.

Fusion Edge touchscreen controls

Touch Screen at the Laser

Select between jobs, auto focus the laser, and rerun jobs at the touch of a button from the easy-to-use touch screen interface right at the laser.

Epilog Laser headquarters building

Engineered & Manufactured in the USA

Proudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains.

Ethernet, USB, and Wireless connections

Network Your Laser Across Your Business

The Fusion Edge features built-in Ethernet, USB, and Wireless options for networking your laser.

Fusion Edge Safeguard features

SAFEGUARD™ Features

Keep the mechanics of your laser machine cleaner than ever before with side enclosures and a fully covered x-axis assembly.

Fusion Edge laser head air assist

Air Assist

The air assist directs air right at the cutting surface to remove heat and combustible gases from the point of laser contact, providing a cleaner cut.

Radiance Beam Enhancing Optics diagram

Radiance™ Beam Enhancing Optics

No additional, expensive lens package needed for the highest resolution engraving across the entire table.

CO2 laser tube

CO2 Waveguide Laser Tubes by Epilog

Metal/ceramic tube design provides higher beam quality and longer life with low recharge costs.

Fusion Edge Epilog Software Suite

1 GB Memory in the Machine

Improve job management and data integrity with 1GB of RAM. Save your most run jobs right at the laser.

Steel bearings

Long-Life Steel Bearing

A dual block design provides the most rigidity and reduced vibration without the inevitable wobble and replacement of plastic bearings.

Accessories: Fusion Edge Laser Machines

Upgrade your laser system with these accessories.


3-jaw chuck rotary device

3-Jaw Chuck

Rotary Attachment

With the 3-Jaw Chuck rotary, objects are clamped into the device's 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment.

Rim-style rotary device

Rim-Style

Rotary Attachment

The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Edge rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.

stand accessory for the fusion edge 12 laser machines

Floor Stand

Fusion Edge 12

An easy-to-use stand for moving your laser around your workspace, this wheeled cart is specially designed for the Fusion Edge 12 laser machine. It provides you greater versatility within your work environment and the ability to easily transport your machine to different locations.

Note: The Fusion Edge 24 and 36 are standalone machines with a built-in pedestals.

Laser system lenses

1.5″ Lens

Highest-Resolution Engraving (12, 24, and 36 only)

Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts.

Laser system lenses

4.0″ Lens

Cutting Thicker Materials

The 4″ lens produces a focused beam over a longer vertical distance, which makes it ideal for cutting through very thick materials.

PhotoLaser Plus software and engraved photo samples

PhotoLaser Plus

Design Software

PhotoLaser Plus takes photo engraving with your Epilog Fusion Edge laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Cutting pin table

Pin Table

Vector Cutting

The Pin Table incorporates movable pins that allow you to raise and support the cutting material in locations where the laser will not be cutting, which helps eliminate backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern, and the handy removable surface plate makes it easy to clean up small parts easy without removing the Pin Table.

air compressor for the air assist feature for clean cuts

Air Assist Pump

Compressor

This high-quality air compressor blows a constant stream of air across the cutting area, which removes heat and combustible gases from the work area and provides the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Fusion Edge CO2 Material Compatibility

Quick guide for your Epilog Laser Machine

Material Engrave Cut
Acrylic
Anodized Aluminum
Ceramic
Cloth
Coated Metals
Corian
Cork
Delrin
Fabric
Fiberglass
Glass
Leather
Marble
Matte Board
Melamine
Mother of Pearl
Mylar
Painted Metals
Paper
Plastic
Pressboard
Rubber
Tile
Wood
Wood Veneer
Stainless Steel *
Brass *
Titanium *
Bare Metals *
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.

Fusion Edge Fiber Material Compatibility

With an Epilog Fiber laser, mark a wide array of metals and engineered plastics.

17-4 PH stainless steel 303 stainless 4043 steel 6061 Aluminum
ABS (white/black) Aluminum, 6061 Aluminum, yellow chromate Bayer 2807 Makrolon polycarbonate
Bayers bayblend FR110 Black/white ABS Black/white polycarbonate Brass
Brushed aluminum Carbon nanotube Ceramics, metal-plated Clear coat anodized aluminum
Cobalt chrome steel Colored delrin (black/brown) Compacted powder iron with phosphate coating Copper
DAP - Diallyl Phthalate Delrin, colored (black/brown) GE Plastics polycarbonate resin 121-R Glass filled PEEK
Glass filled Teflon Hard coat anodized aluminum Inconel metals (various) Machine tool steel
Magnesium Metal-plated ceramics Molybdenum Nickel plated 1215 mild steel
Nickel plated brass Nickel plated gold Nickel plated Kovar Nickel plated steel
Nylon PEEK, white Polybutylene Terephthalate Polycarbonate (black/white)
Polycarbonate resin 121-R, GE Plastics Polycarbonate, Bayer 2807 Makrolon Polysulphone Rynite PET
Santoprene Silicon carbide Silicon steel Silicone wafers
Stainless steel 303 Stainless steel 17-4 PH Steel 4043 Steel, machine tool
Various inconel metals (nickel-chromium super alloys) White PEEK Yellow chromate aluminum Zinc plated mild steel
And Many More!
help desk software