Fusion Edge and Pro Laser Machines

Software/Firmware for Fusion Edge & Fusion Pro Laser Systems

Fusion Edge/Pro

Firmware & Driver Downloads

Signup to receive email notification when a new driver or firmware is available for your laser model.

Signup Now

Epilog Software Suite (7/22/2022)

Please note: Beginning in January of 2023, Epilog Laser will no longer be supporting 32-bit operating systems with upgrades of the Epilog Laser Software Suite. If you are currently using a computer with only a 32-bit operating system, you can continue to use versions of our software released before January 1, 2023. After this date, future updates to the software with the latest features will only be offered in a 64-bit versions.

  • Everything you need to run your Fusion Edge or Fusion Pro system
  • Installs the Epilog Job Manager and the Epilog Laser Dashboard

Version Release Notes

  • Engravers on a network can be automatically discovered
    • The engraver must have a name set in the firmware’s settings menu in order for this feature to work
  • Bug fixes and improvements

- For more information on the Job Manager, click here.
- Download Software Suite install and use instructions.
- For information on how to use the Construction Lines feature, click here

Please note: Remove previous version of Epilog Job Manager and Epilog Software Suite before installation! (Go to Control Panel > Programs and Features and remove the software.)

Download 64-bit (x64) Version Download 32-bit (x86) Version

Minimum Requirements:

  • Windows 7, Windows 8.1, Windows 10, or Windows 11
  • Operating system should have all system updates before installation
  • Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
  • 4GB RAM or more
  • 2 processor cores or more
  • Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
  • Integrated gigabit ethernet required for Fusion M2 vision system. Fusion Pro/Edge does not have the same requirement, but is nice to have.

Recommended Specifications:

  • 8GB RAM or more
  • 4 processor cores or more
  • Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX Firmware Downloads (.SWU) (.ZIP)

Firmware: (8/01/2022)

Please note: Fusion Edge and Pro systems cannot be downgraded below after upgrading to this version.

Download Firmware Download Firmware (.zip)

Read Install Instructions


  1. Improve network settings functionality and usability.
  2. Improve job tracing for all machines.
  3. Add continue button to critical error messages.
  4. Update translations.
  5. Users can now set a machine name during the new user setup wizard for use in autodiscovery.
  6. Add FiltraBox to filter selections.
  7. Add a pop-up error for some fiber laser alarm codes.
  8. Improve drive error diagnostic information.
  9. Improve raster performance.
  10. Add a pop-up to notify a failure in communicating with the laser.


Miscellaneous bug fixes and enhancements


  • How do I know what firmware version I have?
    • If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.
  • How often will I receive firmware updates?
    • If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don't need to be updated in your machine if you are not experiencing issues.