Operating system should have all system updates before installation
Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
4GB RAM or more
2 processor cores or more
Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
Integrated gigabit ethernet required for Fusion M2 vision system. Fusion Pro/Edge does not have the same requirement, but is nice to have.
8GB RAM or more
4 processor cores or more
Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX
Firmware: 18.104.22.168 (9/2/2020)
Please note: Be sure to update to the latest version of the Epilog Software Suite (see above) before updating your machine's firmware.
INSTALL 22.214.171.124 FIRST Please note: Firmware release 126.96.36.199 can only be installed onto Fusion machines that have already been updated to at least 188.8.131.52. Be sure your machine has first been updated to Firmware release 184.108.40.206 (available below) or later.
220.127.116.11 NOTE:An error exists in version 18.104.22.168. If you have already installed 22.214.171.124, please upgrade to version 126.96.36.199 to ensure you do not run into any issues.